The VISULOX PIN Service

Overview

VISULOX provides an internal PIN service for Multi Factor Authentication,

the assistance to a session and for the access to the File Transit Zone.

The PIN has the following criteria:

Length
Symbols
Presentation

PIN configuration (MFA, assist, transit)

List of available configuration parameters for VISULOX PINs

CODE

visulox config list -name pin -force
    -------------------------------------------------------------
    | parameter          |  type | value                        |
    -------------------------------------------------------------
    | pin.2fa.format     | SETUP | 3                            |
    | pin.2fa.length     | SETUP | 6                            |
    | pin.assist.format  | SETUP | 3                            |
    | pin.assist.length  | SETUP | 6                            |
    | pin.symbols        | SETUP | 123456789ABCDEFGHKMNPQRSTUWX |
    | pin.transit.format | SETUP | 3                            |
    | pin.transit.length | SETUP | 6                            |
    -------------------------------------------------------------

Length = Number of characters used for the PIN

Format = Number of characters in a bunch for better reading

Symbols = Allowed characters

To reduce the symbols list to numbers only:

CODE

visulox config edit -name pin.symbols="1234567890" -force
    ------------------------------------
    | parameter   |  type | value      |
    ------------------------------------
    | pin.symbols | SETUP | 1234567890 |
    ------------------------------------

Display PINs via CLI (getpin)

It is possible to display the PINs for the sequence numbers via the Command Line Interface.

CODE

visulox online getpin -sq <sequence number> -out <format string>

Placeholders like %OWNER%, %OWNERSHORT%, %PIN% can be used in the format string.

So the output format can be defined by the customer.